Water Resistant Cement Polyurethane Waterproof Coating For Tunnel / Bridge / Balcony

Water Resistant Cement Polyurethane Waterproof Coating For Tunnel / Bridge / Balcony

Yunyan single component moisture-curing pure polyurethane waterproof coating introduce latest technology, using the high technology and raw material to produce a new type of pure polyurethane waterproof coating. It overcomes some disadvantages, such as two-component polyurethane waterproof coating need to mix before using, mixture uneven can cause performance degradation.

Product features

1.100% pure polyurethane, it will absorb moisture in the air and the moisture will be curing film at the base plane after painting. It is a new environmental friendly products;

2. Particularly suitable for wet surface and complex structure of waterproof construction, without solvent volatilization, self-leveling.

3. The construction is safe and convenient, single component construction does not need to mix. The coating is firm and high elastic after curing.

4.Stable performance, heat and cold resistant(-40℃-95℃), Chemical resistance, anti-aging.

5. Strong cohesive force, it can bond concrete, brick, wood, glass, metal, rubber and other base material.

6. Basic color is red, you can brush various color on the coating surface.

Technical index

Executive standard: GB/T9250-2003

Construction method

1. Removal of debris, stains, dust from the surface of base, the coating part should be solid, clean, without clear water;
2. To use this product to seal 2mm cracks at the base plane;
3. Metal surface must remove rust first and then apply this product;
4. To do node processing first, then scrape and brush this product evenly on clean base plane with the right tools(such as plastic or rubber scraper).
5. The coating thickness is more than 2 mm, scraping can be divided into 2 to 3 times, you can brush the second paint when the coating is non-stick, surface direction should be perpendicular to each other;
6. Reference dosage: (1.0 mm thick) 1.2 —1.5 kg / ㎡; (1.5 mm thick) 1.8 —2.0 kg / ㎡; (2.0 mm thick) 2.4 —2.8 kg / ㎡.

Attention

1. We suggest to seal immediately or one-time use after opening.
2. When the product storage period is long, it will form a thin layer of glue on coating surface, you can remove it when you use. It does not affect the use.
3. The coating thickness should be uniform, close tightly.
4. Construction temperature should be above 0 ℃, construction environment should keep the air circulation.

Yunyan single component moisture-curing pure polyurethane waterproof coating introduce latest technology, using the high technology and raw material to produce a new type of pure polyurethane waterproof coating. It overcomes some disadvantages, such as two-component polyurethane waterproof coating need to mix before using, mixture uneven can cause performance degradation.

Product features

1.100% pure polyurethane, it will absorb moisture in the air and the moisture will be curing film at the base plane after painting. It is a new environmental friendly products;

2. Particularly suitable for wet surface and complex structure of waterproof construction, without solvent volatilization, self-leveling.

3. The construction is safe and convenient, single component construction does not need to mix. The coating is firm and high elastic after curing.

4.Stable performance, heat and cold resistant(-40℃-95℃), Chemical resistance, anti-aging.

5. Strong cohesive force, it can bond concrete, brick, wood, glass, metal, rubber and other base material.

6. Basic color is red, you can brush various color on the coating surface.

Scope of application

1. The structure of the flat sloping roof, roof gutter, rainshed, and various irregular roof, especially for beautiful roof, , overpasses and playground’s waterproof processing;
2. It can be used for all kinds of water conservancy projects, such as water channel, the construction of waterproof and sealed plugging；
3. Indoor and outdoor walls’ waterproof, moistureproof and decoration; Chemical plant, steel mills, power stations and roof of the corrosion environment and with acid, alkali, salt, oil pool outside anti-corrosion;
4. Indoor floor, bathroom, bathroom, garden, flower bed, hot spring pool, swimming pool, sewage ponds and cold storage floor of waterproof engineering;
5. Sealed waterproof for all kinds of doors and windows, wall tube and cracks;
6. Metal, pipe surface and galvanized roofing anticorrosive, antirust, waterproof processing.

Construction method

1. Removal of debris, stains, dust from the surface of base, the coating part should be solid, clean, without clear water;
2. To use this product to seal 2mm cracks at the base plane;
3. Metal surface must remove rust first and then apply this product;
4. To do node processing first, then scrape and brush this product evenly on clean base plane with the right tools(such as plastic or rubber scraper).
5. The coating thickness is more than 2 mm, scraping can be divided into 2 to 3 times, you can brush the second paint when the coating is non-stick, surface direction should be perpendicular to each other;
6. Reference dosage: (1.0 mm thick) 1.2 —1.5 kg / ㎡; (1.5 mm thick) 1.8 —2.0 kg / ㎡; (2.0 mm thick) 2.4 —2.8 kg / ㎡.

Attention

1. We suggest to seal immediately or one-time use after opening.
2. When the product storage period is long, it will form a thin layer of glue on coating surface, you can remove it when you use. It does not affect the use.
3. The coating thickness should be uniform, close tightly.
4. Construction temperature should be above 0 ℃, construction environment should keep the air circulation.

Storage, transportation and packing

1. This product is a non-dangerous goods, non-toxic, tasteless, no pollution, it is safe to transport;
2. You should pay attention to seal when storing, and stored in indoor and ventilated, cool, dry place;
3. The shelf life is 6 months;
4. Packing: 25KG/ barrel

FOR OEM:

 1. Brand Owner’s Authorization Letter is required to be issued & provided for the corresponding production and exportation;

 2. Quality only based on the samples which the buyer provided or YUNYAN’s counter-sample confirmed by buyer.

    In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

 3. OEM MOQ: at least 1*20 feet container per item/color.

FOR DELIVERY: